HYDRAULIC BOTTLE SQUAT JACK 20000KG

HYDRAULIC BOTTLE SQUAT JACK 20000KGMIN HEIGHT 195MM MAX HEIGHT 360MMSCREW HEIGHT 60MM LIFT HEIGHT 115MMFAMOUS WORKHORSE BRAND BOTTLE JACK 20 TONNE TALL SCREW ADJUSTMENT 60MM RAM TRAVEL 115MM SCREW TOP DIAMETER 45MM BASE SIZE IS 150MM X 130MMSAFETY PRECAUTIONS -WARNING: FAILURE TO HEED THE FOLLOWING WARNINGS CAN RESULT IN PERSONAL INJURY AND/OR EQUIPMENT DAMAGE.THESE WARNINGS CANNOT COVER EVERY SITUATION, SO HAVE SAFETY FOREMOST IN YOUR MIND WHEN SETTING UP A JOB.- READ, UNDERSTAND AND FOLLOW THE OPERATING INSTRUCTIONS AND THE ANSI B30.1 AND ASME PALD-1 SAFETY STANDARDS FOR JACKS. IF THE OPERATOR CANNOT READ ENGLISH, OPERATING INSTURCTIONS AND SAFETY PRECAUTIONS MUST BE READ AND DISCUSSED IN THE OPERATOR'S NATIVE LANGUAGE.- WEAR EYE PROTECTION THAT MEETS THE REQUIREMENTS OF ANSI Z87.1 AND OSHA.- INSPECT THE JACK BEFORE EACH USE; DO NOT USE THE JACK IF IT IS DAMAGED, ALTERED, OR IN POOR CONIDITION.- TO PREVENT TIPPING, SET UP THE JACK ON A HARD, LEVEL SURFACE. SET VEHICLE PARKING BRAKE AND BLOCK TYRES.- THE LOAD MUST NOT EXCEED THE RATED LIFTING CAPACITY OF THE JACK. LIFT ONLY DEAD WEIGHT.- CENTER THE LOAD ON THE JACK SADDLE, BECAUSE OFF-CENTRE LOADS CAN DAMAGE SEALS AND CAUSE HYDRAULIC FAILURE.- USE THE JACK FOR LIFTING PURPOSES ONLY. THIS JACK IS DESIGNED TO LIFT LOADS, NOT SUPPORT LOADS. IMMEDIATELY SUPPORT A LIFTED LOAD WITH JACK STANDS.- STAY CLEAR OF LIFTED LOADS.- USE ONLY APPROVED HYDRAULIC FLUID, SUCH AS CHEVRON AW HYDRAULIC OIL MV OR EQUIVALENT.- THE JACK SHOULD BE USED ON HARD, LEVEL SURFACES- THE WHEELS OF THE VEHICLE TO BE CHOCKED- DO NOT PUT A PORTION OF YOUR BODY UNDER A VEHICLE SUPPORTED BY A JACK- NO PERSON SHOULD REMAIN IN A VEHICLE THAT IS BEING JACKED- DO NOT EXCEED THE WORKING LOAD LIMIT